The FP-FA Series wire-in flush mount photocontrols provide superior performance for internal mounting requirements. All Series FP-FA controls utilize a rugged, SPST bimetalic switch. Durable, polycarbonate housing material is used, with a clear UV-stabilized window ultrasonically welded in place to prevent moisture ingress.


The FP-FA Series are compact flush mounted, high temperature resistant controls designed for industrial, commercial, and decorative lighting fixtures. The versatility and reliability of these controls allow them to be used as replacement units in a wide range of outdoor lighting fixtures.
  

Photocell: Cadmium sulfide (CdS)
Switch Contact Rating: SPST-NC (single pole, single throw, normally closed) bimetallic switch.
Housing: UV-resistant polycarbonate. (black)
Window: Clear, UV-stabilized
Nipple: 3/8"-18 thread; 3/4" long; fits 3/8" knockout; 11/16" opening
Leads: 6" long, color coded. 105°C wire, 1/2" stripped.
Turn-On: 1 to 4 footcandles (fc)
Turn-Off: 3 to 12 footcandles (fc)
Time Delay: 30 seconds, minimum.
Rated Life: 5000 operations minimum at rated load.
Operating Temperature Range: -40° to +140°F; -40° to +70°C
Dimensions: 2.062"L; 1.00"W; 1.53"D
 
Model Line Voltage Load Rating
Tungsten HID Ballast
FP-FA-105 120V 1000W 1800VA
FP-FA-1068 208-277V 1000W 1800VA
FP-FA-347 310-370V 1000W 1800VA